=== building ===

In order to compile this, you will need GNU Make, GCC, GNU LD, pkg-config, Open MPI, and gtkmm 4.

On Debian, you can install all of these with
  apt install make gcc binutils pkg-config openmpi-bin libgtkmm-4.0-dev

On macOS with Homebrew, you can install all of these with
  brew install make gcc binutils pkg-config open-mpi gtkmm4

Then, to build all of the software, just run make.

=== core war standard ===

lib94 attempts to follow the draft standard at <https://corewar.co.uk/standards/icws94.txt>, minus P-space. There are no read/write
limits (or if you prefer, they are the same as the core size). The minimum separation is always 0, and the core size is set at 8000.
To change the core size, change LIB94_CORE_SIZE in include/lib94/lib94.hpp, run make clean, and then run make.

=== bench ===

The "bench" program (short for test bench) is intended for testing out warriors and seeing exactly what they do. It allows you to
single step, or run at a variety of rates. It has a large display which shows core reads/writes/executions as they happen, and a
listing of all of the instructions in the core. It also shows "alive" warriors, their instruction pointer for the next step, and
how many processes they have.

To open bench, just run bin/bench after building as above.

=== tabulator ===

The "tabulator" program runs every possible pairing of warriors from a selection against each other a number of times, and then shows
the number of wins of each warrior against each other warrior in a table format. This program uses MPI to run batches of these rounds
in different processes, and communicate the results back to a head process.

To run all of the included warriors against each other, run
  mpirun bin/tabulator-mpi warriors/*.red

Note that tabulator expects at least two processes (one head process and at least one worker). If you only have one core, you may run
  mpirun -np 2 --oversubscribe bin/tabulator-mpi warriors/*.red